Announcement

Collapse
No announcement yet.

Material needed for expansion

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Material needed for expansion

    We are looking to expand our facility here at Medford Self Storage and we would like to know if anybody has extra or used materials to sell for the construction of new units (doors, panels, etc.).

  • #2
    Re: Material needed for expansion

    I find stuff on craigslist-sheetmetal, framing, etc. Doors are very hit and miss, especially
    in specific colors

    Comment


    • #3
      Too bad you are not in NC, I have a 10 x 20 unit stacked full with leftover building materials from various expansions we have done.

      Comment


      • #4
        If you are in Medford, Oregon then try contacting Medford Sentry Storage and see if the manager will hook you up with the owner. His name is Craig. He is so tight he squeaks but between 3 facilities he owns in Oregon he may be able to help you.
        "Never let the inmates run the asylum!"

        Comment

        Latest Topics

        Collapse

        • storage-gal
          Reply to Most Successful Promotion/Campaign?
          by storage-gal
          We do 20 or 25% off first 3 months on units that are high vacancy only . It has always worked for us ....
          Today, 01:38 PM
        • SpaceCadet
          Most Successful Promotion/Campaign?
          by SpaceCadet
          Hey SST family! I had a minute to go over our marketing + analytics report, and I wanted to reach out and see what sort of promotions you guys see success with, or "out of the box" thinking that I haven't been applying! So right now my facility is running a 3 months @ 50% off promotion for...
          Today, 01:19 PM
        • jlsjohn
          Reply to We use Chateau cylinder locks
          by jlsjohn
          You don't have to drill the entire cylinder lock. Call Chateau and tell them to give you the drilling instructions for the EZ lock. It takes 5-10 minutes with a 3/16" drill bit....
          Today, 11:45 AM
        Working...
        X